Rogue Tech Tips – Break Quip
BRAKE QUIP: Making Flaring Easy
If you are working on, restoring motorcycles or other types of vehicles it will surely involve making some new lines out of tubing. This has always been a task. That has all changed with the Brake Quip. It is now Fast and Easy. The tool can be used for other tubing needs as well.
Start off by placing the tool in a vice. Select the die set for the size tubing you are flaring and insert it into the tool. Insert tubing through die until it is flush and clamp in place. Install correct punch and operation, and line up with tubing. Pull the handle until punch bottoms out in die set. Unscrew T-handle and open die clamp. That’s it.
Quick and Easy
There are two sets BQ350 which has dies for 45 and 37 degree single and double flares as well as DIN on 3/16 to ½ tubing. It has 14 die sets and 16 punches.
Making-Flare-Operation
The BQ351 is the basic version which has dies for 45 degree flares in sizes from 3/16 to 3/8 and includes a 4.75mm as well.
The company also makes a variety of other Brake Products and you can find out more by visiting their web site at http://www.brakequip.com/ or phoning them Toll Free at 877-431-0075
ROGUE
Recent Comments